​USE: An abrasive liquid for the permanent removal of paintwork defects such as sanding marks (P1500–2000), leaving a high-gloss finish in a single pass. 

TRANSPARENT ACTION: 
A product designed and developed for quick and clean use without the need for water. It allows you to see the defect being removed immediately. Reduced processing time. 

PERMANENT REMOVAL OF DEFECTS 
The product does not mask imperfections, scratches and holograms with cosmetic oils, but eliminates them permanently. USE On all types of paint, including: acrylics, water-based, high-solids LOW COV/VOC, two-component, single-component and original equipment manufacturer (OEM) products. Suitable for polishing scratch-resistant ceramic paints and new water-based clear coats. 

APPROVED: 
Free from ammonia and silicone. 

LOW VOC: 
Contains a very low VOC content, for better environmental conditions. 

HEALTH AND SAFETY: 
Non-irritating, non-harmful, non-flammable. 

FOR BEST RESULTS: 
Step 1: Use 476 CUT & POLISH with the Allchem FOAMED WOOL PAD at medium speeds of approximately 1200–1800 rpm for better cutting action. 
Step 2: Use 472 OEM HOLOGRAM FREE POLISH ULTRAFINE POLISH with the Allchem variable-contact black and white pad at a medium speed of approximately 1200–1800 rpm, for a high-gloss finish free from streaks and holograms. 

NOTE 1: Do not use excessive product. 
NOTE 2: Do not add water during use. 
NOTE 3 
1) Apply 476 CUT & POLISH in small quantities to the surface to be polished. Polish small areas at a time. 
2) Polish the surface applying medium pressure until defects and imperfections are removed. 
3) Reduce the pressure to begin the polishing action. 
4) After polishing, remove any residue with our MICROF® ultra-microfibre cloth. 
5) If necessary, finish by polishing with 472 OEM HOLOGRAM FREE POLISH ULTRAFINE using a white or black pad.