​ Very light abrasive polymer polish for the treatment of surface who leave an invisible protection film against the contamination.  
Increase the gloss of Your car.  
Increase the paint life by 40-50%  
Reduce dirt accumulation by 70-80% 

Clear action
 Product designed and developed for a fast and clean use without addition of water. It allows you to see immediately the removal of the defect. Reduced working time. 

Definitive removal of the defects
 The product doesn’t hide imperfections, scratches and holograms with cosmetic oils, but it removes them permanently. 

Usage
 On all automotive paints, included: acrylics, water-based, high solid LOW VOC, two-component, single-component and OEM auto products. Suitable for ceramic anti-scratch paints and new water-based clear coats.  
APPROVED  Ammonia & silicone free  
LOW V.O.C.  Contains a low VOC content for a better environmental conditions.  
HEALTH & SAFETY  Non irritant, non harmful, Non flammable.  

FOR BEST RESULTS:  
Use 463 PAINT PROTECTION SYSTEM with DA Polisher or air sander.  
Use our white or black foam pad.  
Use our microfibre cloth for wipe off the film.  

NOTE 1  Do not use excessive quantity of product.  

NOTE 2  Do not add water while using the product.  

NOTE 3  Clean the surface with our 445 Hologram Controller or IPA Alcohol. Apply 463 Paint Protection System in small quantity on the surface to be treated. Polish small areas at a time.  Polish the surface very well applying medium pressure.  Reduce pressure allow the polishing action to take place.  After polishing leave the wet product on surface to make adhesion for at least 30’-60’. More time stay wet on top, more time will protect.  Later remove any residue or film with our ULTRAMICROFIBRE CLOTH MICROF®  Later the application do not  wash the car for 4-5 days. Use only neutral shampoo by hand washes.