​466 PROTECTOR LEATHER DESCRIPTION 
​ ​​ VIRTUS 466 LEATHER NANO PROTECTOR is a transparent nanotechnological protector that can be applied to leather and faux leather providing minimal wear and tear. Bringing water repellency and oil repellency to the surface, VIRTUS 466 LEATHER NANO PROTECTOR prevents adhesion of dirt and stains while providing protection against color fading caused by the sun. 

VIRTUS 466 LEATHER NANO PROTECTOR will help you extend the life of your leather by protecting it from chemicals and UV rays. 
Please follow the instructions in the user manual. 

​WHERE TO USE 466 
​ Natural leather, artificial leather, PU leather, PVC, leather surfaces of car seats, home appliances, laptop bags and smartphone cases, furniture. Do not apply to plastic parts, painted surfaces, glass, fabrics. 

​HOW TO USE 466 
​ Surfaces should be dry and free of dust, wax, oil, grease and other contamination.  
Degrease the surface using a detergent to remove any contamination and dry with a clean microfiber cloth before using the product.  
Pour the VIRTUS 466 LEATHER NANO PROTECTOR product onto the applicator cloth placed on the applicator block and spread evenly with horizontal and vertical crisscrossing actions. 
Wait 24 hours for the drying and curing period. Throughout the curing time, store the treated product away from direct sunlight, excessive dust, water and other contaminants. 

​APPLICATION TIPS  
​ For best results, ensure that the environment where the treatment will take place is as close as possible to the recommended temperature and humidity levels (23°C and 50 percent relative humidity).  
Apply in a shaded area.  Apply on surfaces that are not too cold or hot.  
Prepare the surface by cleaning it with neutral detergent to remove any remaining contamination, and dry with a clean, lint-free microfiber cloth before using the product.  Outline the work area using an adhesive tape.  
Consumption is 30-40 ml/m2 for genuine leather and 25-30 ml/m2 for artificial leather. Do not use excess product. Shake the bottle well before use. Pour VIRTUS 466 LEATHER NANO PROTECTOR onto the applicator cloth placed on the applicator and spread evenly in horizontal and vertical motion.  Make sure there are no dry areas. Allow the surface to dry for 24 hours to ensure full effectiveness. 
Throughout the curing time, store the treated surface out of direct sunlight, excessive dust, water and other contaminants.  
In case of accidental application to surfaces other than those specified, the surface should be cleaned immediately with a clean, lint-free microfiber cloth.  

Key Advantages and Features:  
Highly hydrophobic  
Resistant to chemicals and UV rays  
Leaves no stains 

​STORAGE 
​ To achieve high product efficacy, store the unopened bottle in a dry, well-ventilated space away from heat and ignition sources, storing it from 0°C to +30°C. The shelf life of the product is 12 months from the date of manufacture when stored in the unopened package. After opening the container of VIRTUS 466 LEATHER NANO PROTECTOR it is recommended to use the product within 2 months. 
After each use, it is recommended that the lid be resealed to prevent product loss through evaporation.